← Back to blog

Aircon Quote Breakdown: What Each Line Should Tell You

November 17, 2026
Aircon Quote Breakdown: What Each Line Should Tell You

A good air conditioning quote names the exact units, the kilowatt output, the pipework, the electrics, the commissioning and the F-Gas paperwork, each on its own line with a price. If yours is a single figure for "supply and fit", you cannot tell what you are paying for, and you cannot compare it with a second quote. This guide shows you how to read a quote, what typical UK prices look like, why two quotes for the same room can differ by hundreds of pounds, and what to ask before you sign. We install across Devon and Cornwall, so the examples are written for homes in the South West.

Frostairconditioning
Know What Your Air Conditioning Quote Covers
Frostairconditioning installs air conditioning in Devon and Cornwall, with F-Gas certified installation and same day installs available.
Visit

TL;DR

  • A single-room split system typically costs around £1,500 to £2,500 supplied and installed in the UK, with two to three rooms costing considerably more.
  • A proper quote itemises units (brand, model, kW, refrigerant), pipework, drainage, electrics, commissioning and F-Gas certification.
  • Most price gaps between quotes come from the pipe route, electrical work and access, not the unit itself.
  • Compare quotes on the same room, same kW output and same inclusions, and ask what is excluded.
  • Installation is a one-off cost: running costs and annual servicing are separate and should be planned alongside it.

Table of Contents

What UK homeowners typically pay

Before reading a quote line by line, you need a sense of the total. Published UK guides give broadly similar ranges, and they sit well above what a portable unit costs because they include professional installation.

Country Living's 2026 cost guide puts a single-room wall-mounted split system at around £1,500 to £2,500 supplied and installed. Two to three rooms come to £3,500 to £6,500, and larger homes or ducted systems to £8,000 to £15,000 or more.

BBC News (July 2026) reports that portable units average £350 to £650, while wall-mounted split units are £750 to £1,100 each before labour. It also cites an estimate of £2,000 to £3,500 for a full single-room installation, and up to £6,000 for several rooms.

Ideal Home quotes an installer saying a straightforward single-room job usually lands between £1,500 and £2,500 including the unit, and takes about four hours. Multi-split systems for two to three rooms are around £3,000 to £5,000, and four to six rooms can reach £9,000 or more.

The ranges overlap but are not identical, which is the point: a headline number tells you very little until you see what sits behind it. For a wider budget view, our guide on whether air conditioning is expensive in the UK walks through the main cost drivers.

Comparison of published single-room installation price ranges

The lines a proper quote should contain

A quote is a list of decisions. Each line tells you something about the system you will live with. An installation quoting guide published in June 2026 sets out the items a complete quote should itemise. Here they are in plain English, with what to look for.

1. Indoor and outdoor units

The quote should name the brand, the model, the capacity in kW and the refrigerant type. R32 is the current standard refrigerant in new domestic systems. Capacity matters most: a unit that is too small struggles on hot days, and one that is too large cycles on and off and feels uncomfortable. If a quote says only "2.5kW split system" with no brand or model, you cannot check warranty terms or compare like with like.

We supply Samsung, Mitsubishi, Toshiba and Daikin systems, so when we quote you will see the actual make and model named, not a generic description.

2. Refrigerant pipework

The pipes carry refrigerant between the outdoor and indoor units. They are usually priced by the metre, including insulation. Many quotes include a standard allowance and charge extra beyond it, so ask how many metres are included and what each extra metre costs. This single line is behind many of the differences between quotes, as the next section explains.

3. Condensate drainage, trunking and fixings

Air conditioners remove moisture from the air, and that water has to go somewhere. The quote should say how the condensate drain will run and whether a condensate pump is needed, which is the case when gravity cannot carry the water away. It should also cover trunking (the plastic cover that hides pipes on a wall), brackets and fixings.

4. Electrical connection

The unit needs a safe electrical supply, and the connection must meet the Part P rules, which are the building regulations for electrical safety in homes. A good quote says whether the work is a simple connection to an existing circuit or needs a new circuit. If your consumer unit (fuse board) needs work, that should be a separate, clearly labelled line, not hidden in a lump sum.

5. Commissioning and F-Gas certification

Commissioning means testing and setting up the system after it is installed. Because air conditioners contain fluorinated gases, the engineer handling the refrigerant must be F-Gas certified. The quote should say so, and say what paperwork you will receive at handover. Our guide to verifying F-Gas certification and the company register explains how to check an installer yourself, and our five checks for F-Gas compliance turns it into a short routine.

6. VAT, warranty and exclusions

Check whether the price includes VAT, and read the exclusions. Some guides note that scaffolding, extended or concealed pipe runs, electrical supply upgrades and annual servicing are commonly not included unless stated. The safest quote is the one that tells you what is excluded in writing.

Why two quotes for the same room can be hundreds of pounds apart

If both installers are quoting for the same room, the difference usually is not the box on the wall. Tom Houlker, director of Houlkair, told Country Living in June 2026 that cost comes down to three things: the type of system, the size of the space and how awkward the installation is. He describes the pipe route between the indoor and outdoor units as the hidden cost that pulls two quotes for the same room apart.

The same article lists the features that push a price up: long pipe runs, extra electrical work, awkward wall access, multiple indoor units and hidden pipework. In a Devon or Cornwall home this often looks like:

  • Solid stone or cob walls. Common in older cottages and farmhouses, they take longer to core through than a modern cavity wall.
  • Outdoor unit position. If the only sensible spot is at the far side of the house, or off the ground, the pipe run lengthens and access becomes harder.
  • Concealed pipework. Hiding pipes in a ceiling void or behind boxing looks neater than trunking but takes more labour.
  • Multi-room systems. One outdoor unit serving several indoor units needs more pipework and a more careful design. Our guide to multi-room aircon design explains how that planning works.

A quote that was written without anyone seeing the property is a guess about all of these. A quote written after a site visit can price them. We offer free surveys, so the pipe route, the wall type and the electrical supply are seen before a figure is given.

How to compare quotes like for like

When two quotes arrive, resist the urge to compare the bottom lines first. Lay them side by side and compare the lines in this order.

What to compareWhat you want to seeWhy it matters
Room(s) coveredSame rooms on both quotesA quote for one room is not comparable with one for two
Capacity (kW)Similar output for each roomToo small or too large affects comfort and running cost
Brand and modelNamed on each lineWarranty and efficiency differ by model
Pipe allowanceMetres included and price per extra metreThe biggest source of hidden extras
ElectricsNew circuit or existing, consumer unit work labelledCan add a significant sum if missing from the base price
DrainageGravity drain or pump statedA pump is an extra part and a possible fault point
CommissioningIncluded, with F-Gas certificate detailsRequired for a safe, legal installation
WarrantyLength and any servicing conditionSome warranties depend on annual servicing
VAT and exclusionsStated clearlyAvoids a surprise at the end

If one quote is much cheaper, find the line that explains it. Often it is a short pipe allowance, no electrical work, no commissioning detail or a smaller unit. A cheap quote with gaps is not cheaper once the gaps are filled.

Ask both installers to quote for the same specification, then compare. If you would like help working out what that specification should be, our guide to types of air conditioning for UK homes covers wall-mounted, multi-split and ducted options.

Questions to ask before you accept a quote

These are the questions that turn a vague quote into a firm one:

  1. Has someone seen the property? A written quote after a survey is more reliable than one based on photos or a phone call.
  2. What is the pipe allowance, and what is each extra metre? You want a number, not "as required".
  3. Is any electrical work needed, and is it included? Ask about the circuit and the consumer unit separately.
  4. Who will do the work? Ask whether the engineers are employed by the company or subcontracted, and whether they are F-Gas certified. Our engineers are local and F-Gas certified, and we do not use subcontractors.
  5. What paperwork do I get at handover? You should expect F-Gas records and warranty registration details.
  6. What is the warranty, and does it depend on servicing? Manufacturer warranties often require an annual service.
  7. How long will it take? Straightforward single-room installs can take about four hours according to the Ideal Home guide. We typically complete installations within one to two days.
  8. Is finance available? If you want to spread the cost, ask about 0% finance and read the terms. We offer 0% finance.
  9. What happens if something goes wrong later? Ask whether there is a breakdown service and who answers the phone.

It is also worth reading our overview of reasons to use a professional for installation, which sets out what a professional job includes beyond the unit itself.

The costs that sit outside the quote

The installation quote is a one-off figure. Two other costs belong in your budget from the start.

Running costs

Uswitch's guide, updated in October 2026, gives running costs of £0.20 to £0.39 per hour for portable units, £0.21 to £0.66 per hour for single-split systems and £0.26 to £1.32 per hour for multi-split or ducted systems. These figures move with electricity prices, which change as the energy price cap is reset, so use them as a guide and check your own tariff. Our article on air conditioner running costs shows how to estimate your own bill and reduce it.

Servicing

Homebuilding quotes Daikin UK as saying annual servicing typically costs £150 to £200 depending on unit size, location and type, and that an annual service is usually required to keep the manufacturer warranty. A full service includes a system check, filter and outdoor coil cleaning and a pipework inspection. ClearScore's 2026 review finds a one-off service typically costs £70 to £120 per unit, with more to pay when access equipment, parts or regassing are needed.

Servicing

Because warranty can depend on servicing, it makes sense to ask for the service plan at the same time as the installation quote. Our seasonal service checklist sets out what a service should cover.

Our view: a quote should leave nothing to guess

We think a quote is the first piece of service you give a customer. If it is vague, the job usually is too.

The pipe route, the wall, the electrics and the unit capacity all decide what a system costs and how well it works. That is why we start with a free survey: the details that change a price are visible on site and impossible to judge from a photo.

We use premium systems from Samsung, Mitsubishi, Toshiba and Daikin, fitted by our own local F-Gas certified engineers, with REFCOM registration and no subcontractors. Most installations are completed within one to two days, and same day or next day installs are available.

Our advice to any homeowner in Devon or Cornwall is simple: ask for every quote to name the unit, the kilowatts, the pipe allowance and the electrical work. When all of that is written down, the right choice is much easier to see.

James

Get a quote you can check line by line

If you are planning air conditioning for a home in Exeter, Devon, Cornwall or elsewhere in the South West, our domestic installation service starts with a free survey, followed by a system designed for your rooms. We fit Samsung, Mitsubishi, Toshiba and Daikin systems, offer 0% finance, and can often install within a day or two.

Frostairconditioning

Once your system is in, our service and maintenance plans cover annual servicing and emergency breakdown response, so the installation and the aftercare are looked after by the same team.

FAQ

How much should an aircon quote cost for one room?

Published UK guides put a single-room wall-mounted split system at roughly £1,500 to £2,500 supplied and installed, according to Country Living. Your figure depends on the pipe route, the electrics and access. A survey is the only reliable way to turn a range into a price.

Why is my quote higher than a friend's?

Usually because of the installation, not the unit. Longer pipe runs, new circuits, awkward wall access and concealed pipework all add labour and materials. Compare the pipe allowance, the electrical line and the unit capacity on both quotes.

Should the quote include VAT?

It should say clearly whether VAT is included. Ask for the total including VAT so you can compare quotes on the same basis, and read any exclusions before you sign.

Is the quote the total I will pay for the first year?

The quote covers the installation. You should also budget for electricity to run the system and for an annual service, which is often needed to keep the manufacturer warranty, as Homebuilding reports.

Does the installer need to be F-Gas certified?

Yes. Air conditioning systems contain fluorinated gases, and the engineer handling the refrigerant must hold F-Gas certification. You can learn how to check this in our guide to verifying F-Gas certification.

Sources